TSSPDCL AE Admit Card 2023 Download

TSSPDCL AE Admit Card 2023 Download: The Southern Power Distribution Company of Telangana Limited (TSSPDCL) has released the official notification of Assistant Engineer / Electrical Recruitment 2023.

Candidates who are Enrolled in this Assistant Engineer (Electrical Engineer) Vacancy can Download Admit Card from the link Given Below. For More Details regarding, Pay Scale, Age Limit, Selection Procedure, Job Information and all Other Information, read the Complete Notification and then Apply.

TSSPDCL AE Electrical Recruitment 2023 Imp Dates

  • Application Begin: 23/02/2023
  • Last Date for Apply Online: 15/03/2023
  • Pay Exam Fees Last Date: 15/03/2023 (upto 5:00 pm)
  • Application Correction Date: 18.03.2023 To 21.03.2023
  • Downloading Admit Card: 20/04/2023
  • Exam Date: 30/04/2023

TSSPDCL AE Electrical Recruitment 2023 Application Fee Details

  • GEN / Other State Candidate: 320/-
  • OBC / EWS / SC / ST / PH: 0/-
  • Pay Exam Fee Through Debit Card, Credit Card OR Net Banking Mode.

TSSPDCL AE Recruitment 2023 Age Limit As on 01/01/2023

  • Minimum Age: 18 Years
  • Maximum Age: 44 Years
  • Age Relaxation Extra as per TSSPDCL AE Electrical Recruitment 2023 Rules.

Note: The Upper age limit is raised up to 10 years i.e., from 34 to 44 years as per G.O.Ms.No.42, General Administration (Services-A) Department Dt:19.03.2022 as adopted by TSSPDCL vide S.P.O.O.JS (IR&M) Ms No.649, Dt.22.04.2022.
The Upper age limit of 44 years is relaxable up to 5 years in respect of SC/ST/BC/EWS candidates and up to 10 years in respect of Physically Handicapped candidates.

TSSPDCL AE Recruitment 2023 Vacancy Details Total: 48 Post

Name of PostEducational Qualifications
Assistant Engineer/ElectricalMust possess a Bachelor’s Degree in Electrical Engineering/ Electrical and Electronics Engineering from a Recognized University in India established OR incorporated by or under a Central Act, Provincial Act, OR a State Act (OR) an Institution recognized by the University Grants Commission / AICTE (OR) any other qualification recognized as equivalent thereto (OR) a pass in Section-‘A’ & ‘B’ of A.M.I.E. examination conducted by Institute of Engineers in Electrical/ Electrical and Electronics Engineering.

Note: The candidates who have obtained Bachelor’s Degree in Engineering through Open Universities are required to have recognition by the University Grants Commission/ AICTE/DEC as the case may be. Unless such Degrees have been recognized by the relevant statutory authority, they will not be accepted for purpose of educational qualification. The onus of proof of recognition by the relevant Statutory authority that their Degrees/Universities have been recognised rests with the


The written examination for recruitment of Assistant Engineers (Elecl.) will be held at
different centres located in the GHMC/HMDA area.

Syllabus – TSSPDCL AE Electrical

Section-A: 80 Marks.

I Engineering Mathematics

Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors.

Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series, Vector identities, Directional derivatives, Line integral, Surface integral, Volume integral, Stokes’s theorem, Gauss’s theorem, Green’s theorem.

Differential equations: First-order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s equation, Euler’s equation, Initial and boundary value problems, Partial Differential Equations, Method of separation of variables.

Complex variables: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula, Taylor series, Laurent series, Residue theorem, Solution integrals.

Probability and Statistics: Sampling theorems, Conditional probability, Mean, Median, Mode, Standard Deviation, Random variables, Discrete and Continuous distributions, Poisson distribution, Normal distribution, Binomial distribution, Correlation analysis, and Regression analysis.

Numerical Methods: Solutions of nonlinear algebraic equations, Single and Multi‐step methods for differential equations.

Transform Theory: Fourier Transform, Laplace Transform, z‐Transform.

II. Electrical Engineering

Electric Circuits

Network graph, KCL, KVL, Node and Mesh analysis, Transient response of dc and ac networks, Sinusoidal steady‐state analysis, Resonance, Passive filters, Ideal current and voltage sources, Thevenin’s theorem, Norton’s theorem, Superposition theorem, Maximum power transfer theorem, Two‐port networks, Three phase circuits, Power and power factor in ac circuits.

Electromagnetic Fields

Coulomb’s Law, Electric Field Intensity, Electric Flux Density, Gauss’s Law, Divergence, Electric field and potential due to point, line, plane and spherical charge distributions, Effect of the dielectric medium, Capacitance of simple configurations, Biot‐Savart’s law, Ampere’s law, Curl, Faraday’s law, Lorentz force, Inductance, Magnetomotive force, Reluctance, Magnetic circuits, Self and Mutual inductance of simple configurations.

Signals and Systems

Representation of continuous and discrete‐time signals, Shifting and scaling operations, Linear Time Invariant and Causal systems, Fourier series representation of continuous periodic signals, Sampling theorem, Applications of Fourier Transform, Laplace Transform and z-Transform.

Electrical Machines

Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; Three phase transformers: connections, parallel operation; Auto‐transformer, Electromechanical energy conversion principles, DC machines: separately excited, series and shunt, motoring and generating mode of operation and their characteristics, starting and speed control of dc motors; Three phase induction motors: the principle of operation, types, performance, torque-speed

characteristics, no-load and blocked rotor tests, equivalent circuit, starting and speed control; Operating principle of single phase induction motors; Synchronous machines: cylindrical and salient pole machines, performance, regulation and parallel operation of generators, starting of synchronous motor, characteristics; Types of losses and efficiency calculations of electric machines.

Power Systems

Power generation concepts, ac and dc transmission concepts, Models and performance of transmission lines and cables, Series and shunt compensation, Electric field distribution and insulators, Distribution systems, Per‐unit quantities, Bus admittance matrix, Gauss-Seidel and Newton-Raphson load flow methods, Voltage and Frequency control, Power factor correction, Symmetrical components, Symmetrical and unsymmetrical fault analysis, Principles of over‐current, differential and distance protection; Circuit breakers, System stability concepts, Equal area criterion.

Control Systems

Mathematical modelling and representation of systems, Feedback principle, transfer function, Block diagrams and Signal flow graphs, Transient and Steady‐state analysis of linear time-invariant systems, Routh-Hurwitz and Nyquist criteria, Bode plots, Root loci, Stability analysis, Lag, Lead and Lead‐Lag compensators; P, PI and PID controllers; State space model, and State transition matrix.

Electrical and Electronic Measurements Bridges and Potentiometers, Measurement of voltage, current, power, energy and power factor; Instrument transformers, Digital voltmeters and multimeters, Phase, Time and Frequency measurement; Oscilloscopes, Error analysis.

Analog and Digital Electronics

Characteristics of diodes, BJT, MOSFET; Simple diode circuits: clipping, clamping, rectifiers; Amplifiers: Biasing, Equivalent circuit and Frequency response; Oscillators and Feedback amplifiers; Operational amplifiers: Characteristics and applications; Simple active filters, VCOs and Timers, Combinational and Sequential logic circuits, Multiplexer, Demultiplexer, Schmitt trigger, Sample and hold circuits, A/D and D/A converters, 8085Microprocessor: Architecture, Programming and Interfacing.

Power Electronics

Characteristics of semiconductor power devices: Diode, Thyristor, Triac, GTO, MOSFET, IGBT; DC to DC conversion: Buck, Boost and Buck-Boost converters; Single and three phase configuration of uncontrolled rectifiers, Line commutated thyristor-based converters, Bidirectional ac to dc voltage source converters, Issues of line current harmonics, Power factor, Distortion factor of ac to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Section-B: 20 Marks.

General Awareness and Numerical Ability :

  • i) Analytical & Numerical Ability
  • ii) General Awareness
  • iii) English
  • iv) Related to Telangana Culture & Movement and
  • v) Computer Knowledge

Download the PDF from the Link Given in the Imp Links Table

How To Fill TSSPDCL AE Electrical Recruitment 2023 Online Form


  • Photo width= 3.5cm
  • Photo Height= 4.5cm
  • Signature Space = 1.5 cm
  • Paste the Photo on any white paper as per the above required dimensions. Sign in the Signature Space provided. Ensure that the signature is within the box.
  • Scan the above required size containing a photograph and signature. Please do not scan the complete page.
  • The entire image (of size 3.5 cm by 6.0 cm) consisting of the photo along with the signature is required to be scanned and stored in *.jpg format on the local machine.
  • Ensure that the size of the scanned image is not more than 50KB.
  • If the size of the file is more than 50 KB, then adjust the settings of the scanner such as the dpi resolution, no. of colours etc., during the process of scanning.
  • The candidate has to sign in full in the box provided. Since the signature is proof of identity, it must be genuine and in full; initials are not sufficient. A signature in CAPITAL LETTERS is not permitted.
  • The signature must be signed only by the candidate and not by any other person.
  • The signature will be used put on the Hall Ticket and wherever necessary. If the candidate’s signature on the answer script, at the time of the examination, does not match the signature on the Hall Ticket, the candidate will be disqualified.

How To Fill TSSPDCL AE Electrical

  • TSSPDCL AE Electrical Recruitment 2023 Interested Candidates Can Apply Between 23/02/2023 to 15/03/2023.
  • Before Applying online it is mandatory to read the full notification.
  • Before Applying Online Ready Scan Document Related to the Recruitment Form – Photo, Sign, ID Proof, Etc.
  • Before Applying Online Kindly Check and Collect the Documents – Eligibility, ID Proof, Address Details, and Basic Details.
  • It is Compulsory, If the Candidate is Required to Pay the Application Fee Must Submit it. If You Have Not the Required Application Fees Your Form is Not Completed.
  • Before Submitting, the Application Form Must Check the Preview and All Column Carefully.
  • Take A Print Out of Final Submitted Form.

Imp Links

Download Admit CardClick Here
Apply OnlineClick Here
Download SyllabusClick Here
Download NotificationClick Here
Official WebsiteClick Here
Home PageClick Here
Join TelegramJoin
Join WhatsAppJoin

Also Read

TSSPDCL AE Admit Card 2023 Download


TSSPDCL AE Admit Card Download

TSSPDCL AE Admit Card 2023

TSSPDCL AE Electrical Admit Card

TSSPDCL AE Admit Card Download Online

TSSPDCL AE Admit Card Online

TSSPDCL AE Admit Card Date

TSSPDCL AE Admit Card Recruitment 2023


FAQ Related To TSSPDCL AE Electrical Recruitment 2023

What is the Last Date of TSSPDCL AE Recruitment 2023?

The Last Date of TSSPDCL AE Recruitment 2023 is 15 March 2023.

What is the Exam Date of TSSPDCL AE Recruitment 2023?

The Exam Date of TSSPDCL AE Recruitment 2023 is 30 April 2023.

What is the Salary of a TSSPDCL Assistant Engineer (AE)?

The Salary of a TSSPDCL Assistant Engineer (AE) is Rs. 64295/- to 99345/-

What is the Total number of Vacancies in TSSPDCL AE Recruitment 2023?

The Total number of Vacancies in TSSPDCL AE Recruitment 2023 is 48.

What is the Full Form of TSSPDCL?

The Southern Power Distribution Company of Telangana Limited.

Leave a Comment